Resin Tool

ULTIM8™ VAT - Ultimate VAT Cleaning Tool

Regular price $14

In stock

Description

Introducing the ULTIM8™ VAT – your new go-to tool for quick and efficient FEP cleaning after print failures or whenever you suspect hardened resin particles. For use when executing a screen clean, also known as an FEP or tank clean depending on your printer brand. Learn more about how to clean your vat using this tool.

Crafted from a single piece of die-cast aluminum alloy, the ULTIM8™ VAT features a grit-blasted surface for optimal texture—allowing it to grip but easily release cured resin. Its multiple-stage oxidation and anodization process ensures a durable, hard exterior finish, making it nearly indestructible. Resistant to prolonged exposure to resin, IPA, and all solvents, the ULTIM8™ VAT is built to last.

What's Included:
  • 1 ULTIM8™ VAT
Composition:

The ULTIM8™ VAT is made of a single piece of diecast aluminum alloy. It has been treated with a multiple oxidation and anodization process to ensure a hard external finish. It is nearly indestructible, and resistant to long periods in resin, IPA, and all solvents.

Specifications:
  • Die cast aluminum alloy
  • Grit Blasted, Oxidized, Anodized
  • 40 x 40 x 80mm tall
  • 64 g

Click here for the downloadable instructions.

Attention: when working with resin always use the appropriate eye protection and gloves to avoid contact with the resin.

Steps for Use:


  1. Raise your build plate toward the top of the Z-axis.
  2. If your resin has been sitting for more than a few days, mix it thoroughly to prevent separation, which can lead to incurable areas. Use a soft silicone spatula, such as Wham Bam’s ULTIM8™ WYP, to gently stir the resin in the vat, ensuring a homogeneous solution. While mixing, check for any hardened pieces in the vat; if found, carefully remove and dispose of them.

  1. Place your ULTIM8™ VAT base down toward the corner of your vat, it should be positioned in such a way that 75-80% of the tool overlays the screen and the rest overlays the border such that it provides a great corner peel.
  2. Use a light pressure down while swirling slightly the ULTIM8™ VAT to ensure the bottom releases and makes contact with the FEP.
  3. Use your machine control panel to find the screen clean function and activate it.
  4. Hold down the ULTIM8™ VAT while the cleaning cycle is active.
  5. When the cleaning function is finished, use a piece of cardboard or tray as a drip catcher while lifting upward in a prying motion on the handles of the ULTIM8™ VAT to lift a cured flat layer of resin out of the vat. Allow the excess resin to drip off. Frequently, you can find ways of hanging the ULTIM8™ VAT by the handle on your build plate holder, or download our free drip holder or the Whammy head holder.

  1. When done dripping, remove the whole tool and resin. Peel the cured resin off of the ULTIM8™ VAT. Dispose of the cured resin and drop your ULTIM8™ VAT in some IPA for a final clean.
  2. If you have any resin remaining in the bottom grooves, leave the ULTIM8™ VAT in IPA overnight and the remnants will drop right out.
  3. You are ready to print!

Note: If you observe significant chunks or other particles remaining in your resin, it's advisable to remove the vat, strain it using a funnel and strainer like our ULTIM8™ FUN, and thoroughly clean your equipment.


  • 5 stars: 20 (74%)
  • 4 stars: 1 (4%)
  • 3 stars: 0 (0%)
  • 2 stars: 1 (4%)
  • 1 star: 5 (19%)
N
Nate
Works Like a Charm

I love this tool, makes VAT cleaning so simple and the handle hooks perfectly for minimizing resin loss.

M
Musashi Sampson
What Bam is still the best

We here at Kintsugi Industries live by Wham Bam products. Sure there are other products, but you can not knock it till you try. It will speak for itself.

W
Woody
Favorite tool after putty knife

By far, this has become my favorite tool second to my putty knife. No more draining the vat after a failed piece or worrying about getting every last bit in the strainer. This little tool has saved me so much time and frustration. And it is so simple.

S
Shawn Ross
Not effective

I had to update the gcode for my printer, rebalance it multiple times and reconfigure all of my print settings and after all of that half of the build plate fails regularly. I will not be buying more for my other printers.

D
Darrin Lanchbury
Great Tool

I bought one of these last year and it makes getting debris out of the vat so easy. I use it on a Saturn 4 with water washable resin. Drop it in the corner, zap the bottom of the vat with light from the menu, gently peel the solid mass off the release film and let the excess resin drip into the vat. Throw away the hard resin and clean the end of the tool so it is ready to go again. Brilliant!

J
JJ
Doesn't work, save your money

Just use some leftover supports. I've had this thing work one time for me. Wish I hadn't bought it. It's expensive for what it offers.

R
Robert Raithel
Works fantastic!

This tool has made cleaning the resin tank effortless!

M
Matt Mossholder

ULTIM8™ VAT - Ultimate VAT Cleaning Tool

W
Wayne Fairweather

ULTIM8™ VAT - Ultimate VAT Cleaning Tool

a
alison taylor
Good squeegee, ok at mixing

I like it, but the rake doesn’t seem to work as well as in the videos. My resin ,vulcan tabletop, is fairly low viscosity compared to others but it hardly filters through the rake holes. If yall made an attachment that had fewer and larger/wider holes it would be more effective of a mixing tool. It IS faster than my plastic pallets scraper, but it had to time it to really be able to tell. But because it is softer on the fep i dont regret the purchase, and still recommend it to friends with the caveat that its not as advertised exactly.

J
Jonathan B
Meh. Kinda ok.

It's not working with my anycubic or sunlu black resin, 20-25 second tank cleans in saturn 4 ultras, lifting with the sheet like a peel and not straight up, and it rarely sticks to the sheet. Occasionally it will stick with a little downward pressure (I assume it's getting the resin out from under the thing so there's no resin curing under the aluminum) but then if there are any half-prints in the vat it will separate. It's still useful to get that corner up in those instances so I'm not digging at the FEP with a fingernail through the gloves, but it's not what I expected and doesn't work as described.

We are sorry to hear you are having this issue. Please reach out to our technical support team at technical@WhamBamSysytems.com and they would be happy to assist in getting it to work as intended!

A
Alex
Great tool!

Cleaning the tank is a breeze now! I don’t have to run around to find a piece of support from a previous prints to clean the tank

L
Logan Kerr
Fantastic tool

No more holes in my fep!

L
Logan
Works For My Saturn 4 ultra 16k

There is a review here stating that this doesn’t work for their Saturn 4 ultra 16k. It works on my machine, but I did have to increase my exposure time by 5 seconds and have to be careful not to bend the resin sheet when removing the tool. This tool is infinitely times better than the paper method.

t
tyler johnson
Excellent Product

Excellent product. I always run my vat clean at the highest possible duration (for me that’s 60 seconds) and it works great. I’m inclined to buy a second one so I can better hang the film on the build plate, across the vat to better drain off the excess resin.

A
Alan

Awesome and really works!

Looks cool :)

B
Buddy Olvera
Perfect for cleaning the vat

Works great, just put in a corner and lift up slowly

M
M.K.
Excellent Tool!

This thing is great! Makes cleaning out your resin vat a breeze!

R
Robert Ginn
Vat cleaning tool

The tool works awesome on my Saturn 3 ultra. Works every time.

J
Jeff
Handy gadget

I tried the paper trick, it usually ripped before I could pull up the cured resin. This weighs itself down, reaches the right spot to pull up the cured resin cleanly. It’s so much faster and easier than emptying and filtering. I tried filtering the resin after using this. Nothing remained in the filter. I can usually resume printing in a couple minutes,.

J
Johnny Blaze
Never works

i love the flex plate but this product is bad never grabs the resin sheet, Saturn 4 ultra 16k

We are sorry to hear you are having this issue! Please reach out to our technical support team at technical@WhamBamSystems.com and they would be happy to assist!

L
Leo Pesce
ULTIM8™ VAT - Ultimate VAT Cleaning Tool?

I have not used it yet, but it is a great tool to have for my Elegoo printer. Well made. And good value.

B
Berto
Absolutely Useless

Ultimate VAT Cleaning Tool simply doesn't work. I followed the instructions and followed their instruction video and it still has never worked. It has never actually pulled off the screen without breaking and leaving more particles behind. You will more likely just pull out the tool after the screen clean, as the tool will only pull out a square chunk of resin the exact size of the tool. You will still be stuck manually removing the hardened resin film it left behind. I wish I could get a refund for this tool.

Hi Berto, we are sorry to hear about your experience. The screen clean method has been around for years and is typically done with delicate leftover support materials, we just added weight to make it stronger and save you time. Please reach out to our technical support team at technical@whambamsystems.com and they can assist with getting this tool to work as expected!

J
J.S.
What a great idea. It's worked great for me so far

I'm really liking the ULTIM8 resin printing tools. They all seem thoughtfully designed. I've been resin printing since 2020 and these tools all feel well thought out and well made.

W
Wekster
I love it!

Works great!

R
Robert Roos
Great product!!

This works exactly as stated. It makes a vat clean much easier without the need to drain the vat. Definitely recommend.

F
Frank
Never Arrived

Never Arrived

Franklin,
We are very sorry for the miscommunication, this item will ship separately from the rest of your order! We expect shipping to be available by the end of the week and we will add a small gift as a token of our appreciation for your patience.